Tinymight 2 Quickstart Guide

With great features like session and on-demand modes, full convection heat, and a wide temperature spectrum, the Tinymight 2 dry herb vaporizer is a killer vape with a slight learning curve. We’ll show you how to go from newbie to seasoned pro with this quickstart guide, so grab your Tinymight 2 and follow along for a great first session.

Quick rundown

Tinymight 2 Quickstart Guide

What’s in the Box

Fully charge the Tinymight 2

Let’s fully charge your Tinymight 2 before we roll into our first session. Take the included charge cable, plug in your vape, and let it sit until it’s full. The lights on the bottom of Tinymight 2 will change colors to indicate its current charge:

Note: the included charge cable is USB-C to USB-C so make sure you have a compatible charging block.Tinymight 2 vaporizer quickstart guide charging

Tinymight 2 vaporizer quickstart guide charging

One button and one temperature dial

Turn the Tinymight 2 on/off, heat it up, and switch between its session and on-demand modes with its single button, located on the end of the unit. Turn it upside down and use the small dial, numbered from 1 to 10, to set your temperature.Tinymight 2 vaporizer quickstart guide temperature dial

Tinymight 2 vaporizer quickstart guide temperature dial

Cleanse it with a burnoff

Once it’s fully charged, we’ll run it through a quick burnoff in session mode to prime it and cleanse it of any manufacturing residues. To turn it on into session mode, triple click and hold until it vibrates, and then it’s ready.

Set the temperature dial to 8, insert the stem screen side down, and click the vape once to fire it up. Let it run until it shuts off and then we’re good to go.

Grind your herbs and pack the stem

The Tinymight’s convection heat does well with a medium to coarse ground finish. Take any grinder you have and shred it till it’s chopped up. Then, take the glass stem and pack the end with the mesh screen up to the top with your ground herbs. Give it a light tamp, but don’t pack it down too tight. Then, hold the vape upside down and insert the herb-end of the stem all the way into the oven.Tinymight 2 vaporizer quickstart guide loading the oven

Tinymight 2 vaporizer quickstart guide loading the oven

Set the temperature dial and fire it up in session mode

We’ll run this first batch on #4 through session mode for a light, but effective experience to get a feel for the Tinymight. If your vape is off, triple-click and hold until it vibrates to turn it on and set it into session mode. Click it once and when it vibrates, it’s ready to hit!

Nice, comfortable draw

Once it vibrates, give it a nice comfortable draw of about five seconds. You’ll feel the warmth hit your lips and the vapor tickle your lungs. Convection vapes ramp up the vapor throughout the session so jump right back in with a slower, longer hit if the first one wasn’t up to par.Tinymight 2 vaporizer quickstart guide session

Tinymight 2 vaporizer quickstart guide session

Hit it in on-demand mode

On-demand mode is great if you want to take a few quick hits and save the rest for later. It only heats up when you press the button and turns off as soon as you let go. Just give it a quick triple-click to set it into on-demand mode. Don't hold in the last click.

When you’re ready, click and hold, and hit it when it vibrates. Your herbs only heat up when you click and hold it, so take slow relaxed draws to get the thickest hits. Release the button when you’re done and that’s it!

Give it a stir

Convection vapes, like the Tinymight 2, need a quick stir around halfway through the session to extract every last bit. The makers of the Tinymight know this so they included a built-in stir tool, next to the stem, for this exact reason.

When the vapor starts to thin, hold the vape upside down, remove the stem, and give the herbs a light swirl with the stir tool. Tamp it down, throw it back in the oven and finish it up with a few more hits.Tinymight 2 vaporizer quickstart guide stirring

Tinymight 2 vaporizer quickstart guide stirring

Clear out the stem when you’re done

When you’re all finished with the session, take the stir tool and clear the herbs out of the stem and anything that fell into the oven. If you have one, use a small cleaning brush and remove any herbs stuck to the sides. Make sure you do this after each session to keep your vape in the best condition for longer.

Tinymight 2 vaporizer quickstart guide cleaning

Tinymight 2 vaporizer quickstart guide cleaningTinymight 2 Vaporizer Front View

Tinymight 2 Vaporizer

$349.00

Free shipping on orders of $45 and above

Planet of the Vapes offers free shipping on all orders over $45.00 within the United States.

Our orders are shipped via USPS. Packages generally arrive within 5 business days.

For more details on shipping, see this page. Track your existing order status here.

100% Satisfaction Guarantee

Vaporizers
We want you to be more than happy with your purchase from Planet of the Vapes, we want you to be thrilled! If for any reason you are not fully satisfied, you can return your purchased items, even if used, for a full refund or store credit within 14 days. Unopened, unused merchandise can be returned within 30 days.
Accessories
We only accept returns for accessories if they are within 30 days, unused and unopened, or if they are being returned with a vaporizer under our 14-day satisfaction policy
For more details and instructions, see this page.
Please note: at this time, our easy return policy applies to US customers only.

The POTV Experts are here to help

Our team of friendly experts is happy to answer any questions you may have. Whether it’s related to your order or if you are looking for advice on which vaporizer best suits your needs, don’t hesitate to reach out any time. The preferred and fastest way to get in touch with us, is via our customer support desk.

Visit the POTV- Blog for the latest vaporizer reviews, user guides, comparisons and more.

Back to blog